Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
vkc_74

Connecting FWT LST250 To Laptop

Recommended Posts

Hi ,

I am having a Laptop (XP) which is not having a serial port (as they come with out one nowadays) I want to connect to internet using my FWT .

I got a prolific usb to serial convertor cable. Installed the driver for the same.

It recognises the phone on com5 port and completes the RConnect S/W installation.

But when I try to connect to the internet it gives error 692 : hardware failure

I checked the cables they are fine.

following is the modem log.

Need some help as trying this for quite some time now. Thanks in advance

-----------------------------------------------------------------------------------------

04-28-2004 15:46:08.029 - File: C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2600

04-28-2004 15:46:08.029 - File: C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2600

04-28-2004 15:46:08.029 - File: C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2600

04-28-2004 15:46:08.029 - File: C:\WINDOWS\System32\uniplat.dll, Version 5.1.2600

04-28-2004 15:46:08.039 - File: C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2600

04-28-2004 15:46:08.039 - File: C:\WINDOWS\System32\modemui.dll, Version 5.1.2600

04-28-2004 15:46:08.039 - File: C:\WINDOWS\System32\mdminst.dll, Version 5.1.2600

04-28-2004 15:46:08.039 - Modem type: Standard 19200 bps Modem

04-28-2004 15:46:08.039 - Modem inf path: mdmgen.inf

04-28-2004 15:46:08.039 - Modem inf section: Gen192

04-28-2004 15:46:08.039 - Matching hardware ID: mdmgen192

04-28-2004 15:46:08.109 - 115200,8,N,1, ctsfl=1, rtsctl=2

04-28-2004 15:46:08.129 - Initializing modem.

04-28-2004 15:46:08.129 - DSR is low while initializing the modem. Verify modem is turned on.

04-28-2004 15:46:08.139 - Send: AT<cr>

04-28-2004 15:46:08.139 - Recv: y

04-28-2004 15:46:08.139 - Unknown Response

04-28-2004 15:46:08.139 - The modem failed to respond to the initialization command, Retrying one more time

04-28-2004 15:46:08.139 - 115200,8,N,1, ctsfl=1, rtsctl=2

04-28-2004 15:46:08.159 - DSR is low while initializing the modem. Verify modem is turned on.

04-28-2004 15:46:08.159 - Recv: <bd>

04-28-2004 15:46:08.159 - Unknown Response

04-28-2004 15:46:08.159 - Recv: XZy=<00>

04-28-2004 15:46:08.159 - Unknown Response

04-28-2004 15:46:08.359 - Send: AT<cr>

04-28-2004 15:46:08.359 - Recv: y

04-28-2004 15:46:08.359 - Unknown Response

04-28-2004 15:46:08.359 - The modem failed to respond to the initialization command, Retrying one more time

04-28-2004 15:46:08.359 - 115200,8,N,1, ctsfl=1, rtsctl=2

04-28-2004 15:46:08.379 - DSR is low while initializing the modem. Verify modem is turned on.

04-28-2004 15:46:08.379 - Recv: <bd>

04-28-2004 15:46:08.379 - Unknown Response

04-28-2004 15:46:08.379 - Recv: XZy=<00>

04-28-2004 15:46:08.379 - Unknown Response

04-28-2004 15:46:08.580 - Send: AT<cr>

04-28-2004 15:46:08.580 - Recv: y

04-28-2004 15:46:08.580 - Unknown Response

04-28-2004 15:46:08.580 - Recv: <bd>

04-28-2004 15:46:08.580 - Unknown Response

04-28-2004 15:46:08.580 - Recv: XZy=<00>

04-28-2004 15:46:08.580 - Unknown Response

04-28-2004 15:46:08.580 - Session Statistics:

04-28-2004 15:46:08.580 - Reads : 21 bytes

04-28-2004 15:46:08.580 - Writes: 9 bytes

Share this post


Link to post
Share on other sites

Maybe you should try to change the port speed through which your laptop connects to the phone as Reliance LG RD 2030 phones normally use port speed of 38400 bps. I'm not quite sure about FWT but you could try as from what uve posted it seems as if your laptop is trying to comm. at port speed 115200 bps both times. Hope this helps. :lol:

Share this post


Link to post
Share on other sites

Well, According to the log you have posted the phone seems to be responding,

but it is not responding correctly.

and are you sure that it is a Standard 19200 bps Modem??

because all other Reliance Phones are Standard 28800 bps Modem.

also, try this->

Control Panel->Modems->Standard 19200 bps Modem->Properties->Connection->Port Settings

Select 'USE FIFO BUFFERS' And Set The 'Recieve Buffer' to 2 and 'Transmit Buffer' to 3.

Select 'OK'

Control Panel->Modems->Standard 19200 bps Modem->Properties->Connection->Advanced

Now Enable Flow Control If It Is Disabled And Disable If It Is Enabled.

Best Of Luck..

Share this post


Link to post
Share on other sites

Hello,

I am having LG LST250 FWT phone.

One way to use Rconnect is use the Data cable. That works fine for one of my computer. But....

I want to use it on other computer (Dell lattitude). That computer doesn't have Serial port. However that computer has a modem. Is there a way to connect to RConnect using the computers Modem and LG LST 250.

1) Where to get this Serial to USB cable and how exactly to configure it

2) My Laptop has a Modem, So if I do not want to use USB/ Serial, how to do it.

Any help would be highly appreciated.

Thanks

RB

Share this post


Link to post
Share on other sites
Hello,

I am having LG LST250 FWT phone.

One way to use Rconnect is use the Data cable. That works fine for one of my computer. But....

I want to use it on other computer (Dell lattitude). That computer doesn't have Serial port. However that computer has a modem. Is there a way to connect to RConnect using the computers Modem and LG LST 250.

1) Where to get this Serial to USB cable and how exactly to configure it

2) My Laptop has a Modem, So if I do not want to use USB/ Serial, how to do it.

Any help would be highly appreciated.

Thanks

RB

15704[/snapback]

i dont think u need your laptop's modem .the rconnect modem is inbuilt in fwp/t if u have usb or serial port like your pc u can use it on laptop.like i use same cable for my pc and loptop.my lapto has usb port so one usb end goes in laptop and other phonejack type end of your cable goes to your fwp. please contact me if u need this cable i can get it for u my email is webmaster1963@yahoo.com

Share this post


Link to post
Share on other sites
Hello,

I am having LG LST250 FWT phone.

One way to use Rconnect is use the Data cable. That works fine for one of my computer. But....

I want to use it on other computer (Dell lattitude). That computer doesn't have Serial port. However that computer has a modem. Is there a way to connect to RConnect using the computers Modem and LG LST 250.

1) Where to get this Serial to USB cable and how exactly to configure it

2) My Laptop has a Modem, So if I do not want to use USB/ Serial, how to do it.

Any help would be highly appreciated.

Thanks

RB

15704[/snapback]

i dont think u need your laptop's modem .the rconnect modem is inbuilt in fwp/t if u have usb or serial port like your pc u can use it on laptop.like i use same cable for my pc and loptop.my lapto has usb port so one usb end goes in laptop and other phonejack type end of your cable goes to your fwp. please contact me if u need this cable i can get it for u my email is webmaster1963@yahoo.com

15744[/snapback]

Hey thanks,

BTW, how much that cable costs, is it available in delhi/gurgaon

Regards

Share this post


Link to post
Share on other sites

Hi,

I too am trying to connect my laptop using "prolific usb to serial convertor"!!

the problem u r faicing is the same i too have faced. I would recommned try

uninstalling and reinstalling again. It shd fix up teh prob....make sure u r

installing usb cable driver first then restart then LSP340e modem. then restart.!!

But, even if u will be able to do it successfully...I hope the r connect will not work..

as it is not working for me as well. It does get successfully connected but the speed is ZERO.:-(

I have not yet been able to figure out teh solution to this...if u succedd ..pls share with

me at ankurktr@yahoo.com !!

FYIP,

I am using winXP tried out with both SP1 and SP2.neither works.!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×