Cdma Device Detection

[Ashokjp 15]

WDP is a cdma software

Jayants software uses AT commands and hence it will work on most phones

suporting the particular command..

U can even use the other method like

First open a connection to your phone port using Hyperterminal and

then type AT$QCDMG, then try reading using UniCDMA

[Jayantv 0]

Hi Bored,

Presuming that YOU really have NO prior experience with HyperTerminal.

1. Start Hyper Terminal

2. Type a Name for the Session like CDMA

3. Select the COM PORT where your Device is connected

4. Select the Baud Rate (Generally 115200)

5. Now click OK, you will be connected to HYPERTERMINAL

THIS IS NOT like getting connected on the NET

6. Now you can type the commands, IF YOU DO NOT SEE what you type

then go to the Settings and select Local Echo

7. Type your commands and see the results

Type AT and press enter

You should see an OK, this means the connection is working fine.

Regards,

Jayant Varma

[Code 0]

I tried it on RD 7130 - says Low battery and most of the time closes down. All the feilds on the main dialog have question marks(no info is displayed)