How To Netconnect With Lg Rd6500 And Original Data Cables

[BIBHAS 0]

HI,

CAN ANYONE HELP ME BY TRAINING ME HOW TO CONNECT NET THROUGH RIM MOBILE HANDSET LG RD6500 ? I WAS USED TO SURF WITH A LG RD 2130,BUT AS I CHANGED MY HANDSET KEEPING THE SAME OLD PHONE NUMBER,THE PROBLEM STARTED.I BOUGHT A NEW DATA CABLE FROM LG SERVICE CENTRE AT BARRACKPORE IN WESTBENGAL FOR CONNECTING THE NEW SET ,BUT I FAILED TO CONNECT SO MANY TIMES.EVEN I RETIRE BEING TIRED OF CONNECTING THE CUSTOMER CARE(*399,*412,*333,*343 ).THE RECORDED VOICE CONVEYS THAT 'YOUR CALL IS VALUABLE TO US............BEEP.....BEEP........,BUT NONE CARES.MY OPERATING SYSTEM IS XP PROFESSIONAL SERVICE PACK 2.

N.B: THE SOFTWARE SUPPLIED WITH THE DATACABLE DOSE NOT CONTAINS THE MODEM INSTALLATION PACKAGE FOR LG MAKE RD6500 MODEL.BUT ENGINEER AT THE SERVICE CENTRE TOLD THAT THE USB CABLE AND SOFTWARE FOR LG RD6000 WILL SERVE WELL.

[rajeevjee 0]

Q) How to install R-Connect (thru data cable) ?

Ans) Follow the following steps-

1- DO NOT CONNECT THE DATA CABLE PLUS PHONE TO YOUR PC/ LAPTOP. PUT IT AWAY FOR NOW.

2- Put the data cable CD in the CD drive.

3- If this CD (this CD contains data cable driver not the R Connect software as available on Reliance site) tries to run a program, cross it.

4- Wait for the cursor to settle down.

5- Now, just put the cable in USB port (DO NOT CONNECT THE PHONE ON THE CABLE)

6- Windows will "New hardware found"...follow instructions...it will automatically browse for the correct driver for your cable in the CD.

7- In some third party cases, the "New Hardware found" will run twice. DO NOT CANCEL THE SECOND time. Let this also run and install second time also.

8- It might or might not ask for a restart.

9- Still, do the RESTART

10- Now remove the data cable

11- Put the CD for R Connect Software (preferably from Reliance site) and run the .exe file

12- If it prompts "Continus anyway" click Yes everytime

13- It will prompt you to Power ON the phone and connect thru data cable at the USB port

14- DO IT

15- WAIT

16- WAIT

17- Suddenly it find the "USB MODEM" and continue further

18- It might or might not ask for RESTART

19- Go ahead and connect to internet !!!

DO NOT WORRY IF THE CABLE IS FROM ANY PARTY (FOR LG SETS ONLY). Its just that first of all we should be able to put correct drivers for cable and then of course, it will be able to communicate/ identify the LG Modem for which the correct drivers are available on Reliance site. In your case, you just need to load the new data cable driver first, then it should be smoot sailing !!