Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
HetalDP

Hp-sms Server - 4.0.0.1 ( Sms Software )

Recommended Posts

Date: November 30 2009

The Source Code have been Handed over to the Initial Developers of SMS Server and Now the Latest Version of this Software is 4.0.0.10

It Supports

Nokia CDMA (PDU Mode)

GSM (SMS-Text Mode) (85% GSM Modem run on it)

Huawei EC325 (HS-MSSD Mode)

But GSM PDU Mode is not Supported (100% GSM Phone Support this Mode), I Strongly Suggest to Get CDMA only for SMS as it can send SMS @ Speed on 3600 SMS per Hour Compared to only 700 SMS in GSM Phones. The Software is now Paid Software by the Company Named ITSupport Financial Solutions, Contact them for Products @

admin@ITSupport.net.in

It Support up to 10 Modems EC325 Support 3600 SMS per Hour without any Calling to be made. Thanks for Support.

Share this post


Link to post
Share on other sites

I hope this is good.

Can you please write a tutorial as well!

I know this is asking for too much though

Share this post


Link to post
Share on other sites

hi..does it support nokia 6585 also

Share this post


Link to post
Share on other sites

and please tell me how to go about it.

Share this post


Link to post
Share on other sites

Ok I have tried it and it works well with 6265 on BT.

Good job buddy

Any way to import phone book?

Maybe through Outlook?

Share this post


Link to post
Share on other sites

gr8 work Dear

i really appreciate you work.

its working fine.

i will send you some error to improve you software.

Thanks

:Contento::Contento:

Share this post


Link to post
Share on other sites

Software looks cool, and identifies my phone too. But am getting error while opening the database. Am attaching the snapshot, as well the error details. As it is not able to open the database, nothing works after that. I have WinXpSP2 and Office 2007. I also have .NET Framework 1.1 as well as 2.0 installed. Please let me know what might be going wrong in here. And thanks for developing a software and distributing it for free.

See the end of this message for details on invoking 
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.FormatException: String was not recognized as a valid DateTime.
   at System.DateTimeParse.Parse(String s, DateTimeFormatInfo dtfi, DateTimeStyles styles)
   at System.DateTime.Parse(String s, IFormatProvider provider)
   at System.Data.ConstNode..ctor(DataTable table, ValueType type, Object constant, Boolean fParseQuotes)
   at System.Data.ExpressionParser.Parse()
   at System.Data.DataExpression..ctor(DataTable table, String expression, Type type)
   at System.Data.DataView.set_RowFilter(String value)
   at System.Data.DataView.System.ComponentModel.IBindingListView.set_Filter(String value)
   at System.Windows.Forms.BindingSource.set_InnerListFilter(String value)
   at System.Windows.Forms.BindingSource.SetList(IList list, Boolean metaDataChanged, Boolean applySortAndFilter)
   at System.Windows.Forms.BindingSource.ResetList()
   at System.Windows.Forms.BindingSource.set_DataSource(Object value)
   at HPSMS.SMSForm.RefreshData()
   at HPSMS.SMSForm.OpenData()
   at HPSMS.SMSForm.btnBrowse_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
HPSMS-Server
	Assembly Version: 1.0.0.0
	Win32 Version: 1.0.0.0
	CodeBase: file:///C:/Program%20Files/HPTrade/HPSMS-Server/HPSMS-Server.exe
----------------------------------------
Microsoft.VisualBasic
	Assembly Version: 8.0.0.0
	Win32 Version: 8.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Data
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Transactions
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
	Assembly Version: 2.0.0.0
	Win32 Version: 2.0.50727.42 (RTM.050727-4200)
	CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
	<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

post-2038-1164259839_thumb.jpg

Share this post


Link to post
Share on other sites

Yes Dear

Probably the Database Error is While the DateTime Field of Access Database is not in accordance with your Reginal Date Time Settings

Recommended Option are

Reinstall MDAC2.7 and Above

Reinstall MS.Net 2.0

Uninstall HPSMS-Server

Reinstall HPSMS-Server

Hetal Patel

Share this post


Link to post
Share on other sites

What is the format used by database? I can try changing my regional settings to that and try it out.

Share this post


Link to post
Share on other sites
hi..does it support nokia 6585 also

If your Handset 6585 can Support DKU-2 or CA-53 Cables then this software should run on it

Hetal Patel

Nasik, Maharashtra

Share this post


Link to post
Share on other sites

There was no need to uninstall/reinstall anything. I changed the date format to M/d/Y, and it worked. But I normally prefer d/m/y format for my computer, maybe if you could add something in the software which first checks the date format used on comp and then uses it might be helpful.

Anyway thanks again for the software.

Share this post


Link to post
Share on other sites

great job.

Share this post


Link to post
Share on other sites
Yes Dear

Probably the Database Error is While the DateTime Field of Access Database is not in accordance with your Reginal Date Time Settings

Recommended Option are

Reinstall MDAC2.7 and Above

Reinstall MS.Net 2.0

Uninstall HPSMS-Server

Reinstall HPSMS-Server

Hetal Patel

Hi Hetal,

Thanks for your wonderful SW and your efforts.

I am having 6265 and also a CA 53 cable. I also got the same error as Puneet.

What is MDAC2.7 and above?

On your webpage link that you have given here, there are two links which download the same file 22.4MB (dotnetfx) and also your file (HP-SMS server.msi)

It would be better for us novices if geeks like you could give some more details on using your SW.

Also how to use BlueSoleil Sw with your SW?

Thanks

Edited by khs123

Share this post


Link to post
Share on other sites

yeah please help US to use this software nicely as ...its a dream come true for DAPO

ALSO please let me know as in my case i am using bluetooth for connectively with my computer and i am not having datacable so in that will this software work for me or DATA cable is a must for this...............

thanks in advance

Edited by vikalp

Share this post


Link to post
Share on other sites

@khs123 Check the date format in regional settings -> customize -> date for your comp. Change the short date format to M/d/yyyy (basically the American style) and you are done. Restart the HPSMS-Server, and it should work fine. Worked for me.

And if you have WinXpSP2, in all probability you already have MDAC2.7 installed.

Share this post


Link to post
Share on other sites

^^^

thanks puneet for your instant help.

I tried resetting the date formats. Do we need to uninstall dotnetfx, HP-SMS Server and then reinstal both these? I have winXPProSP2 on my system. So MDAC2.7 may already be installed.

Ok, if we do the unins and reins and then how do we use the SW? the options are not very clear. There is no help menu. I mean how do we send or receive SMSs etc.

Thanks once again

Edited by khs123

Share this post


Link to post
Share on other sites

@khs123: Make sure your error is "String was not recognized as a valid DateTime". In that case there is no need of any uninstall/reinstall. Just set the date format to M/d/yyyy, and then right click on HPSMS-Server icon in the system tray, click on shutdown, and then restart. This should work now.

To send SMS,

1) first you have to configure the server to use your phone, so go to connections tab, use detect phone, and then select your phone in the top-left pane. if any other modem is also selected, deselect it. Click on Start Server button.

2) Go to import SMS TAB -> Manual SMS-> add the number and the message, and then click on send to queue. And you are done, message is sent now.

Test it by sending a message to your own number.

Hope this helps.

Share this post


Link to post
Share on other sites

^^^

Now there is no error.

I have done everything as you have advised. My phone has been detected, selected in the top left pane, etc.

Now I went to the SMS tab, went to the manual tab, typed my own number, typed out a message. Now where is the "send to queue' radio button? I am unable to see it.

My display resolution is set to 1024 x 768 True Color, I tried changing that also to 800 x 600 and also to 640 x 480. But the Send to Queue radio button is missing. Where is it?

Now what to do?

Thanks, Puneet for your efforts.

Edited by khs123

Share this post


Link to post
Share on other sites

post-7068-1164274079_thumb.jpg

post-7068-1164274125_thumb.jpg

post-7068-1164274158_thumb.jpg

post-7068-1164274320_thumb.jpg

post-7068-1164274348_thumb.jpg

Can any one help me out?

Thanks in advance.

Share this post


Link to post
Share on other sites

strange but I think you should be able to see it. seems to be some kind of display problem only.

1-5.jpg

the red boxed button is the one

I think HP will be able to tell you about it.

Share this post


Link to post
Share on other sites

@khs123: You need to increase the resolution of your monitor to 1024 X 768 atleast. The aplication's GUI doesn't readjusts itself to screen resolution and cuts out remaing part. Am attaching a screenshot of my Imort SMS tab, with the location of "Send to Queue" marked. If you comapre it with your screen, you'll see that about a quarter of the screen is missing on the right side, and the button is hidden there.

post-2038-1164275574_thumb.jpg

Share this post


Link to post
Share on other sites

^^^^

Thanks a lot, puneet and tanveer.

My display res. is by default 1024 x 768 always.

I will try once again and revert.

Thanks once again.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×