Jump to content
Reliance Jio & Reliance Mobile Discussion Forums
HetalDP

Hp-sms Server - 4.0.0.1 ( Sms Software )

Recommended Posts

HPSMS-Server Version 2.0.0 Released

The Functionality

1. Automatically Resend the Failed SMS

2. Now we can Schedule the SMS for Birthday and Wishes, etc.

3. Some Database Level Changes

3. Time for Queue Refresh / Failed SMS / Schedule SMS/ Checking of Queue can be Set

Share this post


Link to post
Share on other sites

It did not send the failed messages. i had to send it the old way. Please help

Share this post


Link to post
Share on other sites

It must be. I have thoroghly checked it and then Released it.

Chech that You run the Version 2.0.0 and not 1.9.5

Hetal Patel

Share this post


Link to post
Share on other sites
HPSMS-Server Version 2.0.0 Released

The Functionality

1. Automatically Resend the Failed SMS

2. Now we can Schedule the SMS for Birthday and Wishes, etc.

3. Some Database Level Changes

3. Time for Queue Refresh / Failed SMS / Schedule SMS/ Checking of Queue can be Set

To be very frank, I am not a programmer nor Do i actually know what efforts it takes to build such software and to give such support on the forum.

But 1 thing is for sure we all would like to mention that its really a great software and we appreciate your efforts. Thanks Hetal.

Cheers Chirag

Share this post


Link to post
Share on other sites
It must be. I have thoroghly checked it and then Released it.

Chech that You run the Version 2.0.0 and not 1.9.5

Hetal Patel

i am positive that i have installed ver 2 please tell how to send the remaining messages as there are no error message they are just left at sending and after that nothing happens. then i have to queue all the messages again save then browse and load the HPSMS.mdb file again.

Else the server works perfectly i am using cable too

post-15850-1173175702_thumb.jpg

Edited by keanu_reeves

Share this post


Link to post
Share on other sites

All Message which have Left in Sending mode will be automatically Queued After 2 Minutes then After and the Message will be Sent

Remember one Thing The Server should be Start Mode to make Automatic Resending and Automatic Rescheduling to Work

Share this post


Link to post
Share on other sites

Thanks HP for your great effort in developing this software and continued support.

Edited by abc2005

Share this post


Link to post
Share on other sites

i uninstalled all the old versions and now the software is working like a charm thanks to u HPNasik.

I have fed all my friends birthdays and anniversaries on the SMS server and it is sending them messages and they themselves are calling me to say thanks for remembering them.

Thanks again HPNasik

Edited by keanu_reeves

Share this post


Link to post
Share on other sites

Thanx keeanu. Hope All RimWebian Remember and There Birthday Wishes using it.

Share this post


Link to post
Share on other sites

Hi! Hetal,

tried it..working wonderful. thanx hetal... grt job...

just one quation can I send my name insted of My Mobile no.

Thanks,

Share this post


Link to post
Share on other sites

CDMA and GSM Technology Dont provide this Facility at Mobile End

And GSM Backbone only can handle and Send this type of SMS.

Share this post


Link to post
Share on other sites

Hi Mr. Patel

I've installed your software . It was working very good with 6255 and now I am trying with 3105 . ,

I am getting following two errors which i have given here as print screen . Kindly guide me how to solve it .

i ) Execute Scaler Requires an open and available connection . The connections' current state is closed .

ii ) after that , software is working but ... send sms and all other buttons are disabled .

I have reinstall software and also uninstall and install it again . But .. no progress .

hpserver.doc

Share this post


Link to post
Share on other sites

3105 uses DKU5 cable and the Phone is not supported.

Share this post


Link to post
Share on other sites

Dear Hetal,

Thank you very much for your superb software. The Appreciation u deserve for making such a great software & then giving it for FREE is really not possible even if we try our level best to appreciate it.

I have been using your software since Ver 1.5 with my Nokia 6235 & Cable CA 53. I used Ver 1.9 & Ver 1.95 but i was more happy with Ver 1.5 as it was the most reliable one. 3 days back I downloaded Ver 2.0 & was very very happy to use it as it was superb & it covered all problems which were present in Ver 1.9 & 1.95.

BUT as u know....Humans are greedy.....they always want more....& then they dont stay behind in pointing out problems & complains in everything they use...even if they get it FREE from generous people like you.

I used Ver 2.0 & it was great...The speed is terrrific.. I Could acheive a speed of 53 Sms per Minute But i faced few problems which i would like to share with u.

1) After taking 3-4 SMS for delivery it takes 2 SMS at a time & skips 1 & puts it in Pending.

2) The one which is already sent is shown in pending while the one which is not send goes to delivered .

3) THe SMS which are already shown as SENT is not recieved by the other person.

4) The Pending List consists of all numbers which are already delivered......so the person gets the same SMS 2-3

times...

I hope i could explain myself more clearly. Please let me know if we can do something abt his small issues.

I am using NOkia 6235.. I would like to know if there is a way that i can download all the SMS from My Handset to my Desktop. I tried using NOkia PC SUite But it does have any option for it.. IF u have some solution to this...kindly share with me ..i would really apprecaite it.

Best Regards

Armaan - 9967930466

Share this post


Link to post
Share on other sites
3105 uses DKU5 cable and the Phone is not supported.

Dear Mr. Patel

I am actually using CA42 Cable to attach my 3105 phone . XP is identifying phone drivers . nokia pc suite also does the same thing .

Kindly give me advice then will 3105 with CA42 will work or not .

Share this post


Link to post
Share on other sites
Connect the Phone with DKU2 Cable

Right MyCOmputer -> Properties -> Hardware -> Modems -> Select the Appropriate Modem -> Double Click -> Dignostic

Then Click to Query if you can see any Reply then Start HPSMS-Server and Send SMS

If solved the Problem please reply

Dear Sir

Problem solved 100% result i am getting now by doing the above process but the same i have to do everytime but i am getting good speed and good result both

Thanks

Sanjay Jobanputra

9321388360

Hi Hetal

Thanks a lot for such a nice software, which helps a lot for people like me who sents frequent SMSs. But i m also facing the same problem, people whom i sent messages some of them are getting it 2-3 times. And Currently i dont have admin rights in my system. So, i cant follow the procedure what you have mentioned above. I m currently using version2.0 and i m facing this problem. Is there any other way out ??

Thanks and Regards,

Varun

Share this post


Link to post
Share on other sites
Connect the Phone with DKU2 Cable

Right MyCOmputer -> Properties -> Hardware -> Modems -> Select the Appropriate Modem -> Double Click -> Dignostic

Then Click to Query if you can see any Reply then Start HPSMS-Server and Send SMS

If solved the Problem please reply

Dear Sir

Problem solved 100% result i am getting now by doing the above process but the same i have to do everytime but i am getting good speed and good result both

Thanks

Sanjay Jobanputra

9321388360

Hi Hetal

Thanks a lot for such a nice software, which helps a lot for people like me who sents frequent SMSs. But i m also facing the same problem, people whom i sent messages some of them are getting it 2-3 times. And Currently i dont have admin rights in my system. So, i cant follow the procedure what you have mentioned above. I m currently using version2.0 and i m facing this problem. Is there any other way out ??

Thanks and Regards,

Varun

Hi Hetal

Wanted to add one more thing. Once the message is sent to all the receipient from xls file. The file is locked. To access that file again you have to shutwond the SMS Server and then only u can use that file again.

Share this post


Link to post
Share on other sites
3105 uses DKU5 cable and the Phone is not supported.

Dear Mr. Patel

I am actually using CA42 Cable to attach my 3105 phone . XP is identifying phone drivers . nokia pc suite also does the same thing .

Kindly give me advice then will 3105 with CA42 will work or not .

3105 uses old chipset so SMS using AT Command is not supported by Phone.

See my Webpage

http://HetalDP.GooglePages.com/home2

for tested phones (All DKU2 Suported CDMA phone will work)

Share this post


Link to post
Share on other sites
Dear Hetal,

Thank you very much for your superb software. The Appreciation u deserve for making such a great software & then giving it for FREE is really not possible even if we try our level best to appreciate it.

I have been using your software since Ver 1.5 with my Nokia 6235 & Cable CA 53. I used Ver 1.9 & Ver 1.95 but i was more happy with Ver 1.5 as it was the most reliable one. 3 days back I downloaded Ver 2.0 & was very very happy to use it as it was superb & it covered all problems which were present in Ver 1.9 & 1.95.

BUT as u know....Humans are greedy.....they always want more....& then they dont stay behind in pointing out problems & complains in everything they use...even if they get it FREE from generous people like you.

I used Ver 2.0 & it was great...The speed is terrrific.. I Could acheive a speed of 53 Sms per Minute But i faced few problems which i would like to share with u.

1) After taking 3-4 SMS for delivery it takes 2 SMS at a time & skips 1 & puts it in Pending.

2) The one which is already sent is shown in pending while the one which is not send goes to delivered .

3) THe SMS which are already shown as SENT is not recieved by the other person.

4) The Pending List consists of all numbers which are already delivered......so the person gets the same SMS 2-3

times...

I hope i could explain myself more clearly. Please let me know if we can do something abt his small issues.

I am using NOkia 6235.. I would like to know if there is a way that i can download all the SMS from My Handset to my Desktop. I tried using NOkia PC SUite But it does have any option for it.. IF u have some solution to this...kindly share with me ..i would really apprecaite it.

Best Regards

Armaan - 9967930466

Thanx a lot Nokia 6235 uses the Pop Port Chipset but it is Very much First Generation Chipset so when Sending Become too fast the Phone can not Handle it smoothly, Also Check your machine is not too slow.

I am using Nokia 2865 which is available in Tata for Rs. 5200 and can be converted into Reliance easily with RWorld try 2865 it very much smooth, I uses this phone and some time sends 8000 sms in 3 hours

Share this post


Link to post
Share on other sites

@varun1234

I am aware of this Problem from Day One But

Excel uses Non Sharable Technology Unlike Access or MS SQL database Multiple Users can not share same database source. So when Import some SMS it locked the content of Excel otherwise the Excel file may Corrupt.

Rather Create your Database and Mobile List in Access Database it will be more Smoother and Changes can be made in Access Database from HPSMS-Server

I am Working on Opening Excel file in Non Locked Read only mode.

Share this post


Link to post
Share on other sites
@varun1234

I am aware of this Problem from Day One But

Excel uses Non Sharable Technology Unlike Access or MS SQL database Multiple Users can not share same database source. So when Import some SMS it locked the content of Excel otherwise the Excel file may Corrupt.

Rather Create your Database and Mobile List in Access Database it will be more Smoother and Changes can be made in Access Database from HPSMS-Server

I am Working on Opening Excel file in Non Locked Read only mode.

Thanks a lot for the info hetal.

Regards,

Varun

Share this post


Link to post
Share on other sites

hii Freinds,

Can anyone please tell me how i can use a Tata Phone in Reliance.... Coz the pricing of Tata is far cheaper than Relaince Phones...for the same models... IF anyone can help p me i would buy a Tata Phone & then get it converted to Relaince...

Thanks

Armaan - 9967930466

Share this post


Link to post
Share on other sites

Definately Posted your Question in Wrong Topic,

Please Find or Make Appropriate Topic

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×