Cdma Secrets / Secret Codes

[kaplish 0]

is any secrets codes for reliance lg rd2030 of RIM as nokia and smsung... many gsm sets have ?

i tried lot lot but could not found any where it might help for sending sms free and many kool stuff as nokia have....

please pm me if any body have

[Chirag 5]

is any secrets codes for reliance lg rd2030 of RIM as nokia and smsung... many gsm sets have ?

have u really got anything for GSM handsets of Samsung n Nokia?? Put them up here, such tht we can understand wht u meant by Secret codes tht let u allow a free sms! Weird thing!

[Tushar 0]

This Codes Are For Nokia Phones Only

- Show IMEI Code

If you want to know what's the IMEI code of your phone, press:

*#06#

- Sim Lock Information

To check if the Sim-Clock can be stopped type:

*#746025625#

- Software Version

This code shows you software version, date of manufacture and hardware model number of your phone.

* # 0000 #

- Show Service Menu

To get additional information from your phone you can use the so called "warranty codes", try typing:

*#92702689#

You'll get the following

serial number

manufactured date

date of purchase (if entered)

date of the last repair transfer user data (It may wok and it may not)

- Service Provider Lock

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SI M card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y# This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w characters.

'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Provider(???)-Lock status

#pw+1234567890+4# for SimCard-Lock status (master code) is a 10 digit code, based on the phones IMEI number. (I can NOT give you the master c ode - SO DON'T ASK US FOR IT !!!!!!!)

e.g. To remove restriction on lock 1 type following code: #pw+(master code)+1

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code) eg. To check if phone if restricted on lock 1 type the following code: #pw+1234567890+1#

To get "p" - Press "*" three times

To get "w" - Press "*" four times

To get "+" - Press "*" two times

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone

( consumes more power )

Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

This function is NOT available on 8810

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitati on Linear Prediction) compression technology.This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits. (but you take up more space on thenetwork, so they can charge you more) - Talk-time is reduced with about 5% Half Rate will give you bad soundquality, which gives the serviceprovider the to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

I found this online and thought it would help I dont have a Nokia 2280 so someone pls try.

[Surej 0]

These codes are for GSM nokia...

WBR

Surej

[Tushar 0]

But did u try them maybe some of them would work on CDMA also. You can give it a try.

[Ashokjp 15]

Most of them wont be of any use in CDMA

IMEI and SP LOCK code given here are use with GSM networks..

They dont deal with GSM techniques so they will most probably not work.

Edited May 3, 2004 by StaticElectricity

[emmi 3]

can some one be kind enough to post all the codes avaiable in lg rd2030 like 2539 ** et al

[Vishal Gupta 4]

Hi Everybody!

Here is a list af all codes of LG RD 2030, as i know:

1. 2539** => Lets u to enter AKEY ( if u go inside and dont enter AKEY, ur

mobile will automatically restart).

2. <Menu>+0+9 => Service Mode (It doesnt work in my mobile)

3. dial any no then press <up> key then press <call> key , ur mobile will

automatically restart saying "msccup.c 0160"

4. write a message "ODM <ur mobile no with STD code>" and send to 3737

u will receive a message saying ur mobile Activation date.

Thats all.

if anybody knows extra, please tell.

[Sonic 0]

Hello, I have managed to collect some information for these phones.

Samsung

All type of phones (old modeles):

NAM programming: 47*869#08#9

Test mode: *759#813580 or 5809540*45680

exit test mode - 02

A-Key: menu + 0, code 25##

Samsung A500

1. Enter ## and the 6 digit OTKSL

2. SERVICE MENU will appear and 1.Basic will be highlighted

3. Press OK

4. Device will display NAM CDMA/ Phone Number

5. Enter 10 digit MIN

6. Press OK (3 times)

7. Display will return to Service Menu. Press END.

8. Programming is complete

Samsung N240 and N400

1. Enter ## and type in the 6 digit OTKSL

2. The display will show SVC MENU and 1. Phone Number

3. Press OK

4. Enter the 10 digit MIN and press OK

5. The display will show NAM with Home SID on the second line (Note: SID is no longer used)

6. Press OK

7. The display will return to the SVC MENU

8. Press END to complete the programming

Samsung Uproar

1. Press MENU key

2. Enter 9 2 0

3. Enter the OTKSL

4. At SVC Menu screen press OK

5. Enter MIN and press OK 4 times

6. Enter SID (4654) and press OK

7. Press END key

8. Programming is complete

Samsung N300

1. Press ## followed by the OTKSL

2. SVC menu will be displayed

3. Press 1 for Phone #

4. Enter the 10 digit MIN and press OK

5. MIN that was entered will be displayed press OK

6. SVC Menu will display press 3 for NAM

7. Enter the 4 digit Home SID press OK

8. Press END and handset will power cycle

Samsung i300

1. Tap on the Phone Icon with stylus

2. Press #907*9#0 ENTER LOCK should appear on screen

3. ENTER OTKSL

4. SVC MENU will appear press 1

5. Enter 10 digit MIN and then press SAVE

6. Press SAVE again

7. Press 3 and then press SAVE 6 times

8. Enter the HOME SID and press SAVE once

9. Press END key twice

Samsung A400 and A460

1. Enter ## and OTKSL

2. Press 1 for Basic at MENU (1 of Phone # when using the MSL)

3. Enter 10 digit MIN and press OK

4. At 1.Basic Menu press the END key

5. Handset will power cycle

Samsung 3500 8500 6100 N200

1. Press MENU

2. Press 6 0 (3500) 8 2 0 (8500/6100/N200)

3. Enter OTKSL

4. Press 1 at SVC MENU Screen

5. Enter MIN and press OK

6. Press OK 4 times

7. Enter SID (4654) and press OK

8. Press END key

9. Programming is complete

Qualcomm

QCP-800 programming: menu + 3 + 0.

SPC: "000000" or may be other SPC typed by user.

QCP-820/1920/2035: type "111111" and press Jog Dial.

Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.

QCP 1960 and 2760

1. Press softkey under the work MENU

2. Press 8 0

3. Enter the OTKSL

4. Press softkey for OK

5. Enter MIN and press softkey for OK

6. No SID is require for this handset

7. Press softkey for EXIT

8. Programming is complete

LG

LGC-300 programming: menu + 9 and enter SPC: "000000" or may be other SPC typed by user

A-Key: press STO for some time while you can see special code enter zone. Type 2539** and enter A-key

LGC-330W programming: menu + 4 + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LGC-800W /500 programming: menu + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LGC-510 programming: menu + 3 + 0 and enter SPC: "000000" or may be other SPC typed by user.

A-Key: type 2539** and enter A-key

LG1010 LG4NE1 TP2200 TP2100 Touchpoint SB/DB TP 1100 TP5200

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. Scroll to MIN and press OK

5. Enter 10 digit MIN scroll to SAVE and press OK

6. Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press OK to complete)

7. Enter SID (4654) and scroll to SAVE and press OK

8. Programming is complete

LG5350

1. Enter ## and enter the OTKSL and press the left soft key under the word “Save”

2. At the Service Program display select Mobile Phone # and press the OK in the center of the 4 way navigation key

3. Enter the 10 digit MIN and press OK

4. Scroll down to 4. Advanced and press OK

5. Scroll to NMSI and press OK

6. Enter the MSID and press OK

7. Scroll down to 9. Amps Phone # and press OK

8. Enter the MSID and press OK

9. Press the END key

TP 2100

1. Press ##

2. Enter OTKSL

3. Scroll to SAVE and press Roller Ball in for OK (ESN will display)

4. Select NEXT (by pressing in the roller ball)

5. Scroll to EDIT and press in the roller ball

6. Enter MIN

7. Scroll to SAVE and press roller ball in

8. Select NEXT at the next 3 screens and then EXIT

9. Programming is complete

TP3000

1. Press ##

2. Enter OTKSL

3. Scroll to SAVE and press OK

4. Open flip

5. Use Stylus to enter the 10 digit MIN

6. Press OK (No SID entry is required)

7. Programming is complete

TP 5250

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. The phone display will read SVC Program

5. Scroll to MOBILE PHONE # and press OK

6. Phone display will read Mobile Phone Number

7. Enter the 10 digit MIN and press OK

8. Scroll to Home SID and press OK

9. Enter the 4 digit SID (4654) and press OK

10. Reset Phone will be highlighted. Press OK

11. Phone will reset

12. Programming is complete

LG V111(DM110)

[menu]30.

After ask lockcode, enter: 843691.

Ericsson

Programming:

Shot NAM 987 + menu

Long NAM 923885 + menu and enter SPC: "000000" or may be other SPC typed by user.

CDMA mode 904093 + menu

Analog mode 904095 + menu DM mode 904959 + menu

Hyundai

HGC-120E / -130E programming: #86904**89397#

HGC-600E programming: ##20022002, END and enter SPC: "000000" or may be other SPC typed by user.

Sony

CM-M1300/3300/Z200 programming: type "111111" and press Jog Dial.

Choose "Programming" and enter SPC: "000000" or may be other SPC typed by user.

Sony CM-M1300

1. Power phone on

2. Enter six "1s" ( 111111 )

3. Press the jog dial in

4. Press the jog dial in again to select programming

5. Enter six "0s" for the service security code

6. Phone displays the ESN

7. Press the jog dial in for OK

8. Enter your ten digit cellular telephone number

9. Press the jog dial in for OK

10. Enter your cellular carrier’s system ID (SID) without the zeros

(Example: if your carrier’s system ID is 00035, enter just 35)

11. Press the jog dial in for OK

12. Enter a name for NAM 1 or just press the jog dial in for OK

13. Phone displays Basic NAM 1 Programming is complete

14. Press the jog dial in

15. Press the jog dial in again for EXIT

16. Phone powers itself off

17. Press the power button to power the phone back on

18. Basic programming is complete

Motorola

StarTAC 7760/7860 programming:

Service menu: FCN+0+000000+000000+RCL

Test mode: FCN 00**83786633 STO

V60c programming:

Service menu: 74663 # [Menu] [Menu] (programming code)

Test mode: [Menu] 073887 * (security code = 000000)

Motorola Tarpon (120x)

1. Press 74663 (spells PHONE)

1. Press # MENU MENU quickly

2. Enter OTKSL

3. The work MIN will be highlighted

4. Select the word CHANGE by selecting the top right button

5. Select DELETE. Press and hold the button until clear

6. Have the customer enter the 10 digit MIN number

7. Select OK with the top right button. The “User Activation” screen will appear

8. Scroll to highlight the CDMA Sys ID

9. Select CHANGE by selecting the top right button

10. Enter SID

11. Select OK by selecting the top right button

12. Select DONE with the top left button

13. Press the END key

14. Press # MENU MENU quickly

15. Enter OTKSL

16. The work MIN will be highlighted

17. Select the word CHANGE by selecting the top right button

18. Select DELETE. Press and hold the button until clear

19. Have the customer enter the 10 digit MIN number

20. Select OK with the top right button. The “User Activation” screen will appear

21. Scroll to highlight the CDMA Sys ID

22. Select CHANGE by selecting the top right button

23. Enter SID

24. Select OK by selecting the top right button

25. Select DONE with the top left button

Press the END key

Motorola Phones (ALL)

1. Enter 74663 # FCN FCN

2. Enter OTKSL

3. Enter MIN and press STO

4. Enter SID (4654) and press STO

5. Press STO again – programming is complete

Note: on the Tarpon (120C) you will need to press the MENU key instead of FCN.

Nokia

5185/6185 programming: *3001#12345#

Software version: *#837# or *#VER# or *#9999#

Serial / ESN: *#92772689# or *#WARRANTY#

Phone reset: *#75681# or *#75682#

Nokia 6185-5170

1. Press *#639#

2. Enter OTKSL and press OK

3. Enter the MIN and select OK

4. Enter the SID and select OK

5. Programming is complete

Nokia 3585

1. Enter ## followed by the OTKSL

2. Number (MDN) is highlighted. Press the upper left-hand soft key to select

3. Mobile Number will display. Enter the 10 digit MIN

4. Press OK

5. IMSI will appear. Press and hold the Clear key until the display is empty.

6. Enter 31000 plus the MSID (15 digits total)

7. Press the upper left hand soft key and select OK

8. It will take you back to the SVC Programming. Press the upper right hand soft key to select EXIT

9. Press END.

10. Phone will power cycle and programming is complete.

SK Teletech

SK-IM 1000/1400/2000/2200/2400 programming: #7583538324#626#

Getrun 2000

System NAM programming mode: 0 + 1 + # + 7 + 3 + 7 + SECURITY CODE (000000)

Debug menu: 0 + 1 + # + 3 + 2 + 4 + SECURITY CODE (000000)

Debug screen of field test mode: 0 + 1 + # + 7 + 2 + 7

Test mode: 0 + 1 + # + 7 + 6 + 4 + SECURITY CODE (000000)

System test mode: 0 + 1 + # + 7 + 6 + 8 + SECURITY CODE (000000)

NEOPOINT

Neopoint 1000

1. Press M to display Main Menu

2. Scroll to PREFERENCES

3. Press softkey under SELECT

4. Enter 040793

5. Scroll to PROGRAMMING

6. Press softkey under SELECT

7. Enter OTKSL

8. Press softkey under DONE

9. Scroll to PHONE NUMBER

10. Enter 10 digit MIN

11. Scroll to HOME SID

12. Enter SID (4654)

13. Press softkey under SAVE to exit

14. Programming is complete

NEOPOINT 1600

1. Power the phone on

2. Press the "Menu" key

3. Scroll to "Preferences" - press "Select"

4. Key in the "Field Service Code" (the phone will not prompt you for the code)

at the "preferences" screen to access the "Service" menu (Default code is "000000")

5. Scroll to "Programming" - press "Select" - the phone will ask for the "Subsidy Lock Code"

6. Enter the "Subsidy Lock Code(654321)" to access the "NAM" menu

7. Select the NAM to be programmed (NAM 1 or NAM 2)

8. Program the NAM - Phone number and CDMA Home SID

9. After programming has been completed press "Save" - the phone will reset

Audiovox

Audiovox 9100

1. Press ##

2. Enter the OTKSL

3. Display will read Service/Menu 1 Basic…press OK

4. Next screen will read Service Mode/Home SID…press OK

5. Next screen will read Service Mode/Home SID…press OK

6. Device will display Service Menu 1. Basic #

7. Press END button to complete programming

Handspring TREO

1. Open the flip and press the PHONEBOOK button one time to display the dial pad

2. Enter ## and the OTKSL using the numbers on the Dial Pad

3. Press the handset button shown in the diagram above

4. At the Activations screen enter the MIN in the phone number field using the numbers on the device keyboard

5. Put a check in the Enable Number Portability box and type the MSID in the MSIN field

6. Press OK

7. The device will display the network search pop-up and return to the Phonebook display

Hitachi P300

1. Enter ## and the 6 digit OTKSL

2. Press the Options soft key and then scroll to Save Phone #. Press the OK soft key.

3. At the NAM display scroll to EDIT and press the OK soft key

4. Display will read NAM and MDN will be highlighted. Press the OK soft key.

5. At the MDN display enter the 10 digit MIN and press the SAVE soft key.

6. At the Save prompt press the OK soft key. The next display will show several options that should not edited.

7. Press the EXIT soft key and the device will power cycle.

8. Programming is complete.

Kyosera

Kyocera 2345 1135

1. Press 111111 (#1 key 6 times)

2. Option will be highlighted

3. Press OK

4. Scroll down to Programming

5. The service programming dialog will appear Enter Security Code.

6. Enter the 6 digit OTSKL (code will show as asterisks on screen)

7. Service Options will appear

8. Scroll down to the BASIC NAM1 Info

9. Press OK

10. Select the Phone Number by pressing the OK key

11. Using the keypad enter the 10 digit MIN

12. Press OK

13. Press END to complete the programming

Kyocera 6035

1. Press 1 six times (111111) and select OPTIONS

2. Select PROGRAMMING

3. Open flip

4. Tap the OTKSL on keypad on the screen. Tap OK

5. Tap on the PHONE NUMBER field. Enter MIN.

6. Leave A-KEY blank

7. Enter HOME SID (4654)

8. Tap SAVE & EXIT

9. Tap YES

10. Phone will be in OFF MODE Close flip.

Kyocera 3035

1. Press 111111 (the #1 key six times)

2. Options will be highlighted

3. Press in the navigation key (Navigation key is the button located between the TALK & END key)

4. Scroll to PROGRAMMING using the Navigation key

5. Select PROGRAMMING by pressing in the Navigation key

6. Enter the six digit OTKSL and press in the navigation key

7. SERVICE OPTIONS will appear

8. Scroll down to the Basic NAM1 info

9. Press in the navigation key

10. Clear any numbers that may appear using the “clear” key (arrow key located directly below the navigation key)

11. Select the PHONE NUMBER by pressing in the navigation key

12. Enter the 10 digit MIN select OK by pressing in the navigation key

13. Press END. Programming is complete.

Kyocera 2255

1. Press the 1 key six times (111111) “Option will be highlighted

2. Press OK

3. Scroll down to “Programming” and press “OK”

4. Enter OTKSL and press the navigation key

5. “Service Options” will appear scroll down to the “Basic NAM1 Info”

6. Press OK

7. Select Phone Number by pressing OK

8. Enter MIN and press OK again

9. Scroll to Home SID and press OK

10. Enter SID (4654) and press OK

11. Press END. Programming is complete.

QCP 2035

1. Press 1 six times (111111)

2. Press u key to select OPTIONS

3. Highlight PROGRAMMING and press u key

4. Enter OTKSL

5. ESN will appear press left arrow key to select OK

6. Enter MIN and press з key

7. Press з key again to exit - Programming is complete

Sanyo

Sanyo 4000 4500 4700 5000 6000

1. Press ##

2. Enter the OTKSL

3. Scroll to SAVE and press OK

4. ESN will be displayed – press OK

5. Enter 10 digit MIN and press OK

6. Enter SID (4654) and press OK

7. Press OK twice

8. Programming is complete

Sanyo 5150 5300 and 6400

1. Enter ## followed by the OTKSL

2. Press MENU SAVE PHONE #

3. Press Ok

4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK

5. Press OK again

6. ESN will be displayed. Press OK

7. Mobile Number will be displayed enter the 10 digit MIN press OK

8. Press OK 4 times

9. Phone will power cycle

10. Programming is complete

Sanyo 6000

1. Press ##

2. Enter OTKSL

3. Press MENU Key and scroll to SAVE PHONE # and press OK

4. ESN will be displayed press OK

5. Enter MIN and press OK

6. Enter SID and press OK

7. Press OK twice more

8. Programming is complete

Sanyo 4900

1. Enter ## followed by the 6 digit OTKSL

2. Press the MENU/OK key and scroll and highlight SAVE PHONE #

3. Press MENU/OK

4. Scroll and highlight MOBILE NUMBER press OK

5. At the ESN display press OK

6. In the MOBILE NUMBER screen enter your MIN and press OK 4 times

7. At the service program menu scroll to exit and press the MENU/OK key.

8. Programming is complete

Sanyo 6200

1. Enter ##

2. Enter OTKSL

3. Press the MENU key and scroll to highlight SAVE PHONE #

4. Press OK

5. Scroll and highlight MOBILE NUMBER

6. Press OK twice

7. Scroll and highlight EXIT

8. Press OK

9. Phone will power cycle

10. Programming is complete

Toshiba

Toshiba 2032P

1. Slide the Radio Standby Switch on the left side of the device to the upper side (ON) to activate the phone function. This is the switch with the phone icon over it

2. After power up is completed use the stylus to tap on the ADMIN pull up menu at the bottom of the screen and select ACTIVATION WIZARD. If your device has not yet been activated the ACTIVATION WIZARD will automatically start when you turn on the radio in your device.

3. Tap NEXT 3 times. If the device has been previously activated it will require only 2 presses.

4. On the fourth screen enter the 6 digit OTKSL using keyboard

5. Enter the MIN in both entery fields then tap NEXT

6. Wait for the device to initialize and display “ready to connect”

7. To initiate IOTA tap the word ADMIN at the bottom of the display and then Data Provisioning

8. Programming is complete

*******

Here is a list of various codes to try out. Some may require an MSL to be able to make full use of the functionality.

##2769737 [##BROWSER] - MiniBrowser Settings (2G)

##8626337 [##VOCODER] - Set Vocoder

##3282 [##DATA] - Setup Menu for Vision handsets

##8463 [##TIME] - Airtime Menu

##040793 - Debug Menu

##786 [##RUN] - Technical Information (be careful with this one, you can reset the handset)

##932 [##WEB] - IP Address information (2G)

##889 [##TTY] - TTY On or TTY Off

##4357 [##HELP] - Help

[anujit 0]

Codes for Samsung A563 (possibly works in other models too)!

##2539 + Save key = Akey options

Menu + 8 + * = Field Service Settings

I've tried all the other codes for test mode etc for the Samsung A500 (US equivalent for the A563 www.a500hacking.com) but none of them apart from the AKEY setting works!

[Tushar 0]

Anyone knows what OTKSL means and how do I find it. I'm talking about Kyacera 2235. I got the Srvice Menu but dont know What OTKSL is ie some 6 digit code.

[Ashokjp 15]

Hey ppl wil only post wat they know and wat exists..

New new codes wont get evolved in this handset each day..

[Utsav 0]

Hi Everybody!

              Here is a list af all codes of LG RD 2030, as i know:

1.        2539** => Lets u to enter AKEY ( if u go inside and dont enter AKEY, ur mobile will automatically restart).

What is this AKEY? Whenever I try to enter that for my RD2030, it shows error! How can I set a new AKEY? What can I do with it?

[Code 0]

turbasu U can search the forum __ I think it's already discussed once. BTW it falls on a borderline permissible topic.

[Utsav 0]

I'm not very interested in AKey tampering, all I want to know is that what is this meant for! What is the significance?

[Beetle 0]

Simple words.. "Phones identity" Defines manufacture, brand and is related to ESN. Banned topic.

[Utsav 0]

What is ESN?

[RSumit 0]

Electronic Serial Number (a unique identification number that every cellular phone has and is assigned by the specific manufacturer)

[KingofKalyan 0]

Electronic Serial Number (a unique identification number that every cellular phone has and is assigned by the specific manufacturer)

Does any have some more secret codes to share here..

BTW i was looking for some unlocking codes..

[fix5000 0]

can anyone help me in knowing the service programming number [spn] for my cdma nokia 2112 used for reliance network.

[Vikas Bhadauria 0]

Hi All,

As i went thru the posts in this forum, i came to know that most of our friends generally ask the way to retrieve the forgotten password (Lock Code) of their mobiles.... here is the solution for Samsung 191 Mobile Users...

Retrieving Lock Code For Samsung 191: It is a code used to fetch forgotten password in Samsung 191...

Stpe 1: while ur SAM-191 is locked & displaying "Enter Lock Code" menu, Type the following code--->

*759#813580

Step 2: When u Type this code, another screen Will Appear on ur SAM-191,

Step 3: You have to push "2" button on your keypad until "A" comes on your screen,

Step 4: Now you have to Push "2" for 2 more times & next 4 digits after "A" are ur lock code for Ur

SAM -191....

Step 5: After you note down your Lock code on a piece of paper, Simply remove battery from ur SAM-

191 Mobile & again put the battery back into mobile.

Step 6: now ur mobile is rebooted & will ask for Lock Code Again,

Step 7: Just enter ur password which u have retrieved by using above code & ur phone is unlocked !!!

WARNING: Please DO NOT press any button other than descirbed in above procedure, as it will affect ur phone's programming & may lead to destruction of ur saved data in ur handset. i will not be responsible for any kind of R & D done by you using that code.

This method is used by me a thousand times successfully, if done in proper way... if you find any difficulty using this code or have any other related query, please feel free to mail me on : vikas.bhadauria@techie.com or SMS or Call me on mah Cell no.: 9311006007

With Best Regards,

Vikas Bhadauria

[amtrag 20]

Does it work on Samsung A563 also?

[Vikas Bhadauria 0]

Does it work on Samsung A563 also?

No Man !!! it only works on Samsung -191 ....

I suggest you please do not use this code on any other samsung handset,

if you want to unlock sam A-563, please use any unlocking s/w.

[mikki 0]

Hi there can anyone help me please.

I have a nokia 3737 and i cant seem to get a unlock code so i can out my o2 sim card in it as it is restricted to t-mobile at the moment. i have tried the web but cant find anything.

I would really appreciate this.

Thanks guys

This Codes Are For Nokia Phones Only

- Show IMEI Code

If you want to know what's the IMEI code of your phone, press:

*#06#

- Sim Lock Information

To check if the Sim-Clock can be stopped type:

*#746025625#

- Software Version

This code shows you software version, date of manufacture and hardware model number of your phone.

* # 0000 #

- Show Service Menu

To get additional information from your phone you can use the so called "warranty codes", try typing:

*#92702689#

You'll get the following

serial number

manufactured date

date of purchase (if entered)

date of the last repair transfer user data (It may wok and it may not)

- Service Provider Lock

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SI M card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator. All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:

#pw+(master code)+Y# This code is able to check, activate or remove Sim card restriction (SP-lock).

Use the * key to get the p, + and w characters.

'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with

#pw+1234567890+1# for Provider-Lock status

#pw+1234567890+2# for Network-Lock status

#pw+1234567890+3# for Provider(???)-Lock status

#pw+1234567890+4# for SimCard-Lock status (master code) is a 10 digit code, based on the phones IMEI number. (I can NOT give you the master c ode - SO DON'T ASK US FOR IT !!!!!!!)

e.g. To remove restriction on lock 1 type following code: #pw+(master code)+1

If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code) eg. To check if phone if restricted on lock 1 type the following code: #pw+1234567890+1#

To get "p" - Press "*" three times

To get "w" - Press "*" four times

To get "+" - Press "*" two times

Enhanced Full Rate Codec (EFR):

On: Enter *3370# and EFR will be activated after a reboot of the phone

( consumes more power )

Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:

This function is NOT available on 8810

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitati on Linear Prediction) compression technology.This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits. (but you take up more space on thenetwork, so they can charge you more) - Talk-time is reduced with about 5% Half Rate will give you bad soundquality, which gives the serviceprovider the to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

I found this online and thought it would help I dont have a Nokia 2280 so someone pls try.

[Mufaddal 678]

well why dont you try nemesis or phoenix tools.......just google it using this tools you can get out of tmobile lock n can use your o2 sim

if u want i can post those tools here ....just let me know